Aswimmer extends his wet arms into the windy air outside at 1 atm, 5°c, 50 percent relative humidity, and 30 km/h. if the average skin temperature is 25°c, determine the rate at which water evaporates from both arms and the corresponding rate of heat transfer via evaporation. the arm can be modeled as a 0.6-m-long and 7.5-cm-diameter cylinder with adiabatic ends.

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um