Engineering, 28.12.2019 06:31 jjdj5218

How many kg / day of naoh must be added to neutralize a waste stream generated by an industry producing 90,800 kg / day of sulfuric acid, if 0.1% of the sulfuric acid produced ends up in the wastewater? the wastewater flow is 750,000 l / day.

Answers: 2

Show answers

Answers

Answer from: Tariah5970

74.12kg/day

Explanation:

Equation of reaction for the neutralization reaction of sodium hydroxide and sulfuric acid: 2NaOH + H2SO4 yields Na2SO4 + 2H2O

Mass of sulfuric acid produced per day = 90,800kg

Percentage of sulfuric acid in wastewater = 0.1%

Mass of sulfuric acid that ends up in wastewater per day = 0.1/100 × 90,800 = 90.8kg

From the equation of reaction, 2 moles of NaOH (80kg of NaOH) is required to neutralize 1 mole of H2SO4 (98kg of H2SO4)

80kg of NaOH is required to neutralize 98kg of sulfuric acid

90.8kg of sulfuric acid would be neutralized by (90.8×80)/98kg of NaOH = 74.14kg/day of NaOH

Answer from: brittneyrenae7338

74.12 kg/day

Explanation:

First we write the complete neutralization reaction of sodium hydroxide and sulfuric acid.second, neglect wastewater flow rate since you must neutalize all the acid in the waste water. (acid and water make up the waste stream)

2NaOH + H2SO4 → Na2SO4 + 2H2O

Amount of sulfuric acid that enters wastewater = (0.1/100)* 90,800 kg/day

= 90.8kg/day

From the equation above; 98g of H2SO4 was neutralized by 80g of NaOH

90.8 kg/day in the waste stream will be neutralized by how many kg/day of NaOH ?

Expressing the above statement in proportion;

98 g → 80 g

90.8 kg/day → ?

= (90.8 kg/day × 80 g)/98 g

0.1% of sulfuric produced in the waste stream will require 74.12 kg/day of NaOH

Answer from: Quest

Because if a good speech is delivered badly it can bore the audience, confuse them, or make them distrust the speakeri think they all come back to this one, except that last answer because that is false. if your audience starts making fun of you or gets distracted it is because they are either bored, confused or distrust you.

Answer from: Quest

d would be the most obvious choice to this question. leaders are supposed to herd their underlings like a shepherd to sheep. a leader should also listen to others when they are talking to one other to gain a better understanding of their mission and surroundings.

explanation:

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.

Answers: 1

Answer

You know the right answer?

How many kg / day of naoh must be added to neutralize a waste stream generated by an industry produc...

Questions