Engineering, 24.12.2019 23:31 paovue48
Two 0.5 cm-diameter rods of 1020 steel (σts = 395 mpa) are to be joined with a silver braze alloy 0.025 cm thick (σys = 145 mpa) to produce one long rod. the ultimate strength of this brazed structure is found to be approximately 345 mpa. if it is necessary to reduce the diameter of the rods to 0.25 cm with no change to the braze joint itself, will the strength (in mpa units) increase, decrease, or remain the same? if it changes, by how much?
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
Engineering, 04.07.2019 18:10
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
Two 0.5 cm-diameter rods of 1020 steel (σts = 395 mpa) are to be joined with a silver braze alloy 0....
Questions
Mathematics, 20.05.2021 22:10
Mathematics, 20.05.2021 22:10
Mathematics, 20.05.2021 22:10
Mathematics, 20.05.2021 22:10
Mathematics, 20.05.2021 22:20
Advanced Placement (AP), 20.05.2021 22:20
Mathematics, 20.05.2021 22:20
Mathematics, 20.05.2021 22:20
Mathematics, 20.05.2021 22:20
Mathematics, 20.05.2021 22:20
Mathematics, 20.05.2021 22:20
