Engineering, 24.12.2019 23:31 sportygirlscand
Astress-strain test is performed on an aligned fibrous composite such that the force is applied in the longitudinal direction. during the initial stage of the test, which phase bears most of the load? draw a picture of this loading.
Answers: 1
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
Engineering, 04.07.2019 18:10
Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.
Answers: 2
Astress-strain test is performed on an aligned fibrous composite such that the force is applied in t...
Biology, 03.02.2020 04:57
History, 03.02.2020 04:57
English, 03.02.2020 04:57
Mathematics, 03.02.2020 04:57
History, 03.02.2020 04:57
English, 03.02.2020 04:58
English, 03.02.2020 04:58
Mathematics, 03.02.2020 04:58
Mathematics, 03.02.2020 04:58