Engineering, 24.12.2019 03:31 montgomeryaevans

Trips depart on a certain day and time from a departing airport and arrive at a different day and time in an arrival airport. each airport is identified by a code, has a type (e. g., domestic), city and country, and a maximum plane capacity (e. g., 100). each plane has a unique name and a date of manufacturing. a plane also has both weight and passenger capacities that cannot be exceeded. each pilot has a name and an experience level (junior or senior). a senior pilot can supervise one (or many) junior pilots. however, a junior pilot can be supervised by only one senior pilot, if any. create an erd (conceptual model) and a relational model (logical model) to capture the data as described.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.

Answers: 2

Answer

Engineering, 04.07.2019 19:20

Brief discuss how the presence of dislocations in crystal structures can be an advantage and a disadvantage to engineer and designers.

Answers: 3

Answer

You know the right answer?

Trips depart on a certain day and time from a departing airport and arrive at a different day and ti...

Questions