subject
Engineering, 20.12.2019 05:31 mdaniella522

A10-cm-diameter, 30-cm-high cylindrical bottle contains cold water at 3°c. the bottle is placed in windy air at 27°c. the water temperature is measured to be 11°c after 45 min of cooling. disregarding radiation effects and heat transfer from the top and bottom surfaces, estimate the average wind velocity.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
question
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
You know the right answer?
A10-cm-diameter, 30-cm-high cylindrical bottle contains cold water at 3°c. the bottle is placed in w...
Questions
question
Biology, 26.05.2020 10:57
question
Mathematics, 26.05.2020 10:57
Questions on the website: 13722360