subject
Engineering, 20.12.2019 04:31 bigchungus69

Arigid pavement is designed with an 11-inch slab thickness, 90% reliability, = 4 million lb/in2 , modulus of rupture of 600 lb/in2 , modulus of subgrade reaction of 150 lb/in3 , a 2.8 load transfer coefficient, initial psi = 4.8, tsi = 2.5, overall standard deviation of 0.35, and a drainage coefficient of 0.8. the pavement has a 20-year design life. the pavement has three lanes and is conservatively designed for trucks that have one 20,000-lb single axle, one 26,000-lb tandem axle, and one 34,000-lb triple axle. what is the estimated directional daily truck traffic? [15 points]

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
You know the right answer?
Arigid pavement is designed with an 11-inch slab thickness, 90% reliability, = 4 million lb/in2 , m...
Questions
question
Mathematics, 10.12.2020 18:00
question
Mathematics, 10.12.2020 18:00
Questions on the website: 13722367