Engineering, 19.12.2019 01:31 daniel1480
For some metal alloy it is known that the kinetics of recrystallization obey the avrami equation, and that the value of k in the exponential is 2.70 x 10-6, for time in seconds. if, at some temperature, the rate of recrystallization is 0.0012 s-1, what total time (in s) is required for the recrystallization reaction to go to 90% completion
Answers: 3
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
For some metal alloy it is known that the kinetics of recrystallization obey the avrami equation, an...
English, 18.10.2019 04:40
Mathematics, 18.10.2019 04:40
Mathematics, 18.10.2019 04:40
History, 18.10.2019 04:40
Mathematics, 18.10.2019 04:40
Social Studies, 18.10.2019 04:40
Mathematics, 18.10.2019 04:40
Mathematics, 18.10.2019 04:40
Mathematics, 18.10.2019 04:40
Mathematics, 18.10.2019 04:40
Social Studies, 18.10.2019 04:40