Water flows through a horizontal 60-mm-diameter galvanized iron pipe at a rate of 0.02 m 3/s. if the pressure drop is 135 kpa per 10 m of pipe, do you think this pipe is

(a) a new pipe,

(b) an old pipe with a somewhat increased roughness due to aging, or

(c) a very old pipe that is partially clogged by deposits

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.