Engineering, 18.12.2019 04:31 nana55959
Judith works as an office assistant at the octan consulting firm. octan assists clients within a five-mile radius of its office. octan’s client list was compiled from information available in publicly-available business directories. judith’s employment contract has a noncompete clause that prohibits her from working for a consulting company within a 50-mile radius for 5 years after she leaves octan. it also prohibits judith from using the client list. judith leaves octan, and a year later, she takes a job at a competing consulting company that is about 20 miles away from octan. which prohibition in the noncompete covenant is a court most likely to enforce?
Answers: 1
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Judith works as an office assistant at the octan consulting firm. octan assists clients within a fiv...
History, 05.07.2019 15:00
English, 05.07.2019 15:00
Mathematics, 05.07.2019 15:00
Spanish, 05.07.2019 15:00
Mathematics, 05.07.2019 15:00
Mathematics, 05.07.2019 15:00
Mathematics, 05.07.2019 15:00
Mathematics, 05.07.2019 15:00
History, 05.07.2019 15:00
Mathematics, 05.07.2019 15:00
History, 05.07.2019 15:00