subject
Engineering, 17.12.2019 01:31 nayelycuencax

It is desired to produce and aligned carbon fiber-epoxy matrix composite having a longitudinal tensile strength of 640 mpa. calculate (a) the critical fiber length in mm, and (b) the volume fraction of fibers necessary if

(1) the average fiber diameter is 0.029 mm,

(2) the average fiber length is 2.2 mm,

(3) the fiber fracture strength is 5200 mpa,

(4) the fiber-matrix bond strength is 18 mpa,

(5) the matrix stress at fiber failure is 16.1 mpa.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
question
Engineering, 04.07.2019 18:10
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
question
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
question
Engineering, 04.07.2019 18:20
Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?
Answers: 3
You know the right answer?
It is desired to produce and aligned carbon fiber-epoxy matrix composite having a longitudinal tensi...
Questions
question
Computers and Technology, 25.07.2019 06:30
question
English, 25.07.2019 06:30
Questions on the website: 13722362