subject
Engineering, 16.12.2019 22:31 reaunnatowns

Given a 2-way set associative cache with 4 lines using lru replacement within each set. the word size is one byte, there is one word per block, and the main memory capacity is 16 bytes. suppose the cache is initially empty and then the following addresses are accessed in the order listed: {3,4,3,7,7,12,4,8,3,12,7,9}. how many bits are in the tag field? (i. e. the tag itself not including any counter bits) after execution of all of the above references, what are the final contents of the cache ? state your answer as a set of memory addresses whose data resides in cache, e. g. "{3,4,8,12}". for instance, if memory[3], memory[4], memory[8], and memory[12] resided in cache then the answer is stated as "{3,4,8,12}". what is the hit rate? express your answer as a percent.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
question
Engineering, 04.07.2019 18:10
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
question
Engineering, 04.07.2019 19:10
10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.
Answers: 2
question
Engineering, 04.07.2019 19:10
An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed
Answers: 3
You know the right answer?
Given a 2-way set associative cache with 4 lines using lru replacement within each set. the word siz...
Questions
Questions on the website: 13722362