Engineering, 16.12.2019 21:31 mariaceleste110505

Asinusoidal wave on a transmission line is specified by voltage and current in phasor form: v s ( z ) = v 0 e α z e j β z and i s ( z ) = i 0 e α z e j β z e j ϕ where v0 and i0 are both real. (a) in which direction does this wave propagate and why? (b) it is found that α = 0, z0 = 50 ω, and the wave velocity is vp = 2.5 × 108 m/s, with ω = 108 s−1. evaluate r, g, l, c, λ, and ϕ.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.

Answers: 3

Answer

Engineering, 04.07.2019 19:20

The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.

Answers: 3

Answer

You know the right answer?

Asinusoidal wave on a transmission line is specified by voltage and current in phasor form: v s ( z...

Questions