subject
Engineering, 16.12.2019 20:31 Sariyahhall1

Air at 50.0% relative humidity is cooled isobarically at 1 atm absolute from 70.0°c to 35.0°c.

a. estimate the dew point and the degrees of superheat of the air at 70.0°c. dew point: °c degrees of superheat: °c

b. how much water condenses (mol) per cubic meter of feed gas? (see example 6.3–2) mol

c. suppose a sample of the 70.0°c air is put in a closed variable-volume chamber containing a mirror and the pressure is raised at constant temperature until a mist forms on the mirror. at what pressure (atm) would the mist form? (assume ideal gas behavior.) atm

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 04.07.2019 18:10
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
question
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
question
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
You know the right answer?
Air at 50.0% relative humidity is cooled isobarically at 1 atm absolute from 70.0°c to 35.0°c.
Questions
question
Mathematics, 01.02.2021 16:40
Questions on the website: 13722367