subject
Engineering, 16.12.2019 06:31 sophiav9780

Technician a says that obd-ii systems include generic as well as vehicle
manufacturer's specific diagnostic trouble codes (dtcs) and scan data displays,
technician b says that obd-ii systems have common dtcs. who is correct?
o a. technician b
o b. technician a
o c. neither technician a nor b
o d. both technicians a and b

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
question
Engineering, 04.07.2019 19:10
An external consultant recommends that a plant installs a bank of capacitors for power factor correction. this will reduce the peak electrical demand charges by an average of 93 kw every month. the plant current pays $13 per kw in peak demand charges. the capacitor bank will include 223 kw of fixed capacitors, and 183 of variable capacitors. the fixed capacitors cost $59 per kw, and the variable capacitors will cost $65 per kw. the consultant charges 21% of the equipment costs to install the capacitors. because this project will reduce the demand for the electric utility, they are prepared to provide a one-time rebate of $42 per kw of reduced demand. what is the simple payback period for this project (in years)?
Answers: 2
question
Engineering, 06.07.2019 02:30
An electric motor is used to drive a power press which makes steel turning moment diagrams 323 pressings from a metal sheet. the motor runs at a mean speed of 50 rev/s. the torque required is 10.0nm for 0.2s, followed by 1.0nm for0.3 s with this sequence then being repeated. what is the minimum power required of the motor and the moment of incrtia required for the t1ywhcel if the speed fluctuations are to be restricted to 1.5%?
Answers: 3
question
Engineering, 06.07.2019 05:20
An industrial centrifugal air compressor has 34 radial blades that has no pre-whirl. the tip speed of the blades is 300 m/s, and the radial component of the air velocity at the tip is 150 m/s. air is inducted at 101.3 kpa and a stagnation temperature of 305 k. the mass flow rate is 3 kg/s. consider the power input factor to be equal to 1.04 and a stagnation temperature at the compressor exit of 370 k, if the flow is isentropic. assume cp-1005 j/kg.k. find the power input to the compressor (in kw)
Answers: 3
You know the right answer?
Technician a says that obd-ii systems include generic as well as vehicle
manufacturer's specif...
Questions
question
Spanish, 02.01.2020 16:31
question
English, 02.01.2020 16:31
Questions on the website: 13722367