Engineering, 14.12.2019 09:31 emmaja121003

Javier is assembling a robot. arrange the steps he needs to follow to construct the robot and assemble the various components. connect the sensors to the microcontroller. measure the different electrical and mechanical parts on an appropriate frame. connect the communication device to the microcontroller. connect the motor to the motor controller. connect all electrical and electronic components to the ready frame. connect the motor controllers to the microcontroller. draw and finalize the robot design. connect the batteries to various components. connect wheels to the motors. cut the frame, fit all the components on the frame, and assemble the frame.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?

Answers: 1

Answer

Engineering, 04.07.2019 19:20

Air at a pressure of 1atm and a temperature of 40 c is in parallel flow over the top surface of a flat plate that is heated to a uniform temperature of 120 c. the plate has a length of 0.40m (in the flow direction) and a width of 0.15m. the reynolds number based on the plate length is 50, 000. what is the rate of heat transfer from the plate to the air? if the free stream velocity of the air is doubled and the pressure is increased to 10 atm what is the rate of heat transfer?

Answers: 2

Answer

Engineering, 06.07.2019 03:10

List and describe the attached tools in boxford cnc milling machine? and how many tools were used in your projects explain them?

Answers: 3

Answer

You know the right answer?

Javier is assembling a robot. arrange the steps he needs to follow to construct the robot and assemb...

Questions