Acompression spring made of music wire is used for static loading. wire diameter d = 1.4 mm, coil outside diameter do = 12.1 mm, and there are eight active coils. also, assume that the spring ends are squared and ground. find the following:

a. spring rate and solid length.
b. greatest load that can be applied without causing a permanent set in excess of 2%.
c. spring free length with load determined in part b that causes the spring to be solid.
d. whether buckling is a problem. if it is, recommend what you would change in the redesign.

Tom is having a problem with his washing machine. he notices that the machine vibrates violently at a frequency of 1500 rpm due to an unknown rotating unbalance. the machine is mounted on 4 springs each having a stiffness of 10 kn/m. tom wishes to add an undamped vibration absorber attached by a spring under the machine the machine working frequency ranges between 800 rpm to 2000 rpm and its total mass while loaded is assumed to be 80 kg a) what should be the mass of the absorber added to the machine so that the natural frequency falls outside the working range? b) after a first trial of an absorber using a mass of 35 kg, the amplitude of the oscillation was found to be 10 cm. what is the value of the rotating unbalance? c) using me-3.5 kg.m, find the optimal absorber (by minimizing its mass). what would be the amplitude of the oscillation of the absorber?