Engineering, 13.12.2019 02:31 charlettethomap7e9st

An ideal otto cycle has a compression ratio of 8. at the beginning of the compression process, air is at 95 kpa and 27 c, and 750 kj/kg of heat is transferred to the air during the constant-volume heat-addition process. taking into account the variation of specific heats with temperature, determine

(a) the pressure and temperature at the end of the heataddition process

(b) the net work output

(c) the thermal efficiency

(d) the mean effective pressure for the cycle.

approximate answers:

(a) 4000 kpa 1500 k

(b) 400 kj/kg

(c) 50 percent

(d) 500 kpa.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

Answers: 1

Answer

You know the right answer?

An ideal otto cycle has a compression ratio of 8. at the beginning of the compression process, air i...

Questions