Engineering, 12.12.2019 05:31 letsgetcookingblog
Consider a batch process in which 200 liters of a pharmaceutical are heated from 25 c to 70 c by saturated steam condensing at 2.455 bars as it flows through a coiled tube of 15-mm diameter and 15-m length. at any time during the process, the liquid may be approximated as an infinite, quiescent medium of uniform temperature and may be assumed to have constant properties of rho = 1100 kg/m3 , cp = 2000 j/kgꞏk, k = 0.25 w/mꞏk, ν = 4.0 x 10-6 m2 /s, pr = 10, and β = 0.002 k-1. the thermal resistances of the condensing steam and tube wall may be neglected.
a. what is the initial rate of heat transfer to the pharmaceutical?
b. neglecting heat transfer between the tank and its surroundings, how long does it take to heat the pharmaceutical to 70 c? plot the corresponding variation with time of the fluid temperature and the convection coefficient at the outer surface of the tube. how much steam is condensed during the heating process?
Answers: 1
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
Engineering, 04.07.2019 18:20
What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.
Answers: 3
Engineering, 04.07.2019 18:20
Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k
Answers: 2
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
Consider a batch process in which 200 liters of a pharmaceutical are heated from 25 c to 70 c by sat...
Mathematics, 17.10.2021 23:00
Mathematics, 17.10.2021 23:00
Biology, 17.10.2021 23:00
Mathematics, 17.10.2021 23:00
Mathematics, 17.10.2021 23:00
History, 17.10.2021 23:10
Mathematics, 17.10.2021 23:10
Arts, 17.10.2021 23:10
Business, 17.10.2021 23:10
Mathematics, 17.10.2021 23:10