Engineering, 12.12.2019 05:31 ramberson101
Aflexible manufacturing system has four workstations. it uses a rail guided vehicle system to move parts between stations in the layout. all workparts are loaded into the system at station 1, moved to one of three processing stations (2, 3, or 4), and then brought back to station 1 for unloading. load and unload times at station 1 are each 1.5 min. processing times at other stations are: 6.0 min at station 2, 8.0 min at station 3, and 7.0 min at station 4. hourly production of parts through the system is: 8 parts through station 2, 5 parts through station 3, and 7 parts through station 4. the system has the following from-to chart:
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
Engineering, 04.07.2019 19:20
Acircular pipe of 30mm outside diameter is placed in an airstream at 30 c and latm pressure. the air moves in cross flow over the pipe at 20 m/s, while the outer surface of the pipe is maintained at 110 c. what is the drag force exerted on the pipe per unit length? what is the rate of heat transfer from the pipe per unit length?
Answers: 1
Engineering, 06.07.2019 03:20
Asimply supported beam abc of length l has ab of length hl and second moment of area / and bc of length hl and second moment of area i2. determine the strain energy stored in the beam when it is subject to a vertical load f at its midpoint and the consequential central deflection.
Answers: 2
You know the right answer?
Aflexible manufacturing system has four workstations. it uses a rail guided vehicle system to move p...
Questions
Computers and Technology, 04.04.2020 06:35
Physics, 04.04.2020 06:35
Biology, 04.04.2020 06:37
