subject
Engineering, 12.12.2019 00:31 jcazares3558

Consider an air solar collector that is 1 m wide and 6 m long and has a constant spacing of 3 cm between the glass cover and the collector plate. air flows at an average temperature of 45°c at a rate of 0.15 m3/s through the 1-m-wide edge of the collector along the 5-m-long passageway. disregarding the entrance and roughness effects and the 90° bend, determine the pressure drop in the collector. the properties of air at 1 atm and 45° are rho = 1.109 kg/m3, μ = 1.941 × 10–5 kg/m·s, and v = 1.750 × 10–5 m2/s

ansver
Answers: 1

Another question on Engineering

question
Engineering, 06.07.2019 03:10
Oxygen at 300 kpa and 400 k is in a closed system with an initial volume of 0.1 m3. is now compressed in a polytropic process, with exponent of n 1.2, to a temperature of 500 k. calculate: a) the boundary work done during the compression, in kj b) the heat transfer during the compression, in kj
Answers: 3
question
Engineering, 06.07.2019 04:10
Ir at sea level and 30°c and 50% relative humidity flows at a rate of 1 kg/s through a cooling coil that has an apparatus dewpoint of 10°c. the air leaves the coil at 15°c. determine the following: 3.1)- relative humidity of the air leaving the coil; 3.2)- moisture content of the air leaving the coil; 3.3)- sensible heat factor; 3.4)- total heat transfer rate; 3.5)- sensible heat transfer rate 3.6)- latent heat transfer rate
Answers: 1
question
Engineering, 06.07.2019 04:30
List five instruments for angular measurement and explain one of them witlh appropriate diagram(s)
Answers: 1
question
Engineering, 06.07.2019 05:10
An ideal vapor-compression refrigeration cycle is employed to maintain a building temperature of 23°c when the outside temperature is 37°c. the cycle operates at steady state using ammonia as the working fluid. the mass flow rate of the refrigerant is 15 kg/min. the refrigerant enters the compressor at 1.5 bar and 10 °c. the condenser pressure is 20 bar and the temperature at the condenser exit is 45 °c. determine (a) the compressor power in kw. (b) the refrigeration capacity in tons. (c) the coefficient of performance. d) the maximum theoretical coefficient of performance.
Answers: 2
You know the right answer?
Consider an air solar collector that is 1 m wide and 6 m long and has a constant spacing of 3 cm bet...
Questions
question
Mathematics, 30.12.2020 01:00
question
History, 30.12.2020 01:00
Questions on the website: 13722361