subject
Engineering, 11.12.2019 23:31 alexiscorey7051

3a. consider a solar panel system composed of 100 w modules (i. e., panels) that is coupled with a lead acid battery storage system to be used for a small business. you only plan to store electricity overnight. assume that the panels produce electrical energy 8.00 hours each day and that the electrical energy is used steadily throughout the day. size the system so that you can provide 48.0 kwh per day. the capacity factor of the solar panels is 15.0%. the voltage controller efficiency is 90.0%. the round trip efficiency is 78.0%. the depth of discharge is 80.0%. during the day when power is available from the panels it is provided directly to the house and is not stored in the batteries. the cell efficiency is 17%. the installed cost of the system is $4.00/w including the pv panels, battery storage, inverters, and modifications to the house. the system has a solar access factor of 95%, a cleanliness factor of 98%, a temperature derate factor of 0.88, wiring and mismatch loss reduction factor 95%, an inverter efficiency of 90%, and a storage efficiency (i. e., round trip efficiency) of 95% based on input energy. assume that all power delivered by the system is provided through the batteries. solar insolation in the region average averages 250 w/m2 year round. the system may be purchased with a 20 year payback period at an interest rate of 6%. o& m costs are $0.01/kwh. the household has an annual electricity usage of 11,000 kwh. each panel requires 0.72 m2 of roof area.

how much power do the panels need to provide directly to the house (kwh/day)?

how much power do the panels need to provide to the batteries (kwh/day)?

what is the needed rated capacity of the solar panels (kw)?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
question
Engineering, 04.07.2019 18:10
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
question
Engineering, 04.07.2019 18:20
Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?
Answers: 3
question
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
You know the right answer?
3a. consider a solar panel system composed of 100 w modules (i. e., panels) that is coupled with a l...
Questions
question
Mathematics, 19.11.2020 20:40
question
English, 19.11.2020 20:40
question
Mathematics, 19.11.2020 20:40
Questions on the website: 13722359