The tube in a heat exchanger has a 2-in. inner diameter and a 3-in. outer diameter. the thermal conductivity of the tube material is 0.52 btu/h∙ft∙℉, while the inner surface heat transfer coefficient is 50 btu/h∙ft2∙℉ and the outer surface heat transfer coefficient is 10 btu/h∙ft2∙℉. determine the overall heat transfer coefficients based on the outer and inner surfaces.

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux