subject
Engineering, 11.12.2019 03:31 campbellkruger

Aperson is planning a bungee jump from a 40 meter high bridge. under the bridge is a river with crocodiles, so the person does not want to be submerged into the water. the rubber rope fastened to the ankles has a spring constant of 3,600 n/m per meter length. thus one meter length of rope will have a spring constant of 3,600 n/m, two meters of rope will have a spring constant of 1,800 n/m, three meters of rope will have a spring constant of 1,200 n/m and so forth. the distance from the ankles to the top of the head is 175 cm, and the person has a mass of 80 kg. calculate: a. b. c. how long the rope should be [m] how much deflection the rope experiences [m] how much impact force the bungee jumper experiences [n]

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
question
Engineering, 04.07.2019 18:20
A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?
Answers: 3
question
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
question
Engineering, 04.07.2019 19:10
What are the major differences between injection molding and extrusion?
Answers: 2
You know the right answer?
Aperson is planning a bungee jump from a 40 meter high bridge. under the bridge is a river with croc...
Questions
question
Mathematics, 25.01.2020 09:31
Questions on the website: 13722363