Engineering, 07.12.2019 05:31 erstaabi000

Which of the following statements describes a desirable material property for metals used in forming operations?
high strength and toughness
low strength and high ductility
high strength at elevated temperatures
high hardness and low coefficient of friction
all of the above
a tensile test is performed on a plain carbon steel. the steel has a strength coefficient (k) and a work hardening exponent (n) of 1350 mpa and 0.4, respectively. calculate the average flow stress in mpa if the gage length is stretched from 50 mm to 80 mm. answers are rounded to 2 decimal places (x. xx).
0.58
786.08
712.93
998.10
none of the above
which of the following are advantages associated with hot working processes?
good surface finish
the strength properties are generally isotropic.
strain hardening increases the strength and hardness
the work part shape can be significantly altered without annealing.
b and d above
a and b above
arc welding, brazing, and soldering are methods that can be used to join metal components. which of the follow statements are reasons that you would use brazing or soldering to join two metal parts instead of arc welding?
the geometry of the joint is complex
high strength is required.
similar metals, such as two steel alloys are to be joined.
one or more of the metals has poor weldability
all of the above
a and d above

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa.s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)

Answers: 3

Answer

Engineering, 04.07.2019 19:10

When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?

Answers: 2

Answer

You know the right answer?

Which of the following statements describes a desirable material property for metals used in forming...

Questions