Engineering, 03.12.2019 22:31 nourmaali

The allowable bending stress is ơallow-24 ksi and the allowable shear stress is tallow-14 ksi 10 kip 5 kip/ft 4 ft 6 ft 4 ft select the lightest-weight wide-flange beam that will safely support the loading. use the following chart for reference. wide-flange sections or w shapes fps units flange x-x axis -yaxis web thickness width thickness area depth designation in x lb/ft w16 x 57 w16 x 50 w16 x 45 w16 x 36 w16 x 31 w12 x 45 w12 x 26 w12 x 2 in. 0.715 0.630 0.565 0.430 0.440 0.575 0.380 0.425 in. 6.72 6.68 6.65 6.51 in. 16.43 16.26 16.13 15.86 15.88 12.06 12.22 12.31 in, 0.430 0.380 0.345 0.295 0.275 0.335 0.230 0.260 in. 7.120 7.070 7.035 6.985 5.525 8.045 6.490 4.030 in in, 1.60 1.59 1.57 1.52 1.17 1.94 1.51 0.847 758 659 586 448 375 350 204 156 43.1 37.2 32.8 24.5 12.4 50.0 17.3 4.66 12.1 10.5 9.34 7.00 4.49 12.4 5.34 2.31 92.2 14.7 72.7 56.5 47.2 58.1 33.4 25.4 10.6 13.2 7.65 6.48 4.91 w16 x 31 o w16x36 w12 x 2 o w12 x45

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 19:10

How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m

Answers: 1

Answer

You know the right answer?

The allowable bending stress is ơallow-24 ksi and the allowable shear stress is tallow-14 ksi 10 kip...

Questions