Engineering, 30.11.2019 07:31 kaylailkanic1487

10-28 using compare instructions, write a program that uses a single timer to turn pilot lights 1 through 8 on in sequence at 1-second intervals. when all eight lights are on, they are then turned off from 8 to 1 in sequence at 1-second intervals. the pattern is repeated as long as the on/off switch is closed. use the l/o simulator screen and the following addresses to simulate the program: on/off switch_1: 1/0 pl1 o: 2/0 pl2 0: 2/1 pl3 o: 2/2 pl4 o: 2/3 . pl5 o: 2/4 pl6 o: 2/5 pl7 0: 2/6 pl8 o: 2/7 ton t4: 1

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.

Answers: 3

Answer

Engineering, 04.07.2019 19:10

What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.

Answers: 1

Answer

Engineering, 04.07.2019 19:10

A)-in the process of engineering design, explain the contribution of material selection. b)- explain the procedure of synthesis as is employed in engineering design. c)- is there any relationship between ergonomics and engineering design? explain. d)- safety consideration in engineering design includes human, product and the enviroment . explain how safety will be incorporated into the design?

Answers: 3

Answer

Engineering, 04.07.2019 19:20

Apiping systems consists of 6 m of 6-std type k and 12 m of 4-std type k, both drawn copper tubing. the system conveys ethylene glycol at a rate of 0.013 m3/s. the pressure drop across the system is to be calculated. there are two 90° elbows in the 6-in pipe, a reduction from the 6-in pipe to the 4-in pipe and four 90° elbows in the 4-in pipe. all fittings are soldered (same as flanged) and regular. the inlet and outlet of the system are at the same height.

Answers: 1

Answer

You know the right answer?

10-28 using compare instructions, write a program that uses a single timer to turn pilot lights 1 th...

Questions