subject
Engineering, 30.11.2019 05:31 christellechery11

An experiment was conducted to test the effects of a high-protein diet on the ability of chickens to lay eggs that have a high-protein content. ten chickens were obtained from three chicken-breeding farms (all were hens), and their diet consisted of a mixture of fish, cheese, and soybeans. eggs produced from this group of chickens were found to have a slightly higher protein content than eggs purchased at a local grocery store. from this, the investigator concluded that the diet fed to the chickens was responsible for the protein increase in the eggs. how would you analyze these results, using critical thinking?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Burgers vector is generally parallel to the dislocation line. a)-true b)-false
Answers: 2
question
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
question
Engineering, 04.07.2019 19:10
Tom is having a problem with his washing machine. he notices that the machine vibrates violently at a frequency of 1500 rpm due to an unknown rotating unbalance. the machine is mounted on 4 springs each having a stiffness of 10 kn/m. tom wishes to add an undamped vibration absorber attached by a spring under the machine the machine working frequency ranges between 800 rpm to 2000 rpm and its total mass while loaded is assumed to be 80 kg a) what should be the mass of the absorber added to the machine so that the natural frequency falls outside the working range? b) after a first trial of an absorber using a mass of 35 kg, the amplitude of the oscillation was found to be 10 cm. what is the value of the rotating unbalance? c) using me-3.5 kg.m, find the optimal absorber (by minimizing its mass). what would be the amplitude of the oscillation of the absorber?
Answers: 3
question
Engineering, 04.07.2019 19:10
An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed
Answers: 3
You know the right answer?
An experiment was conducted to test the effects of a high-protein diet on the ability of chickens to...
Questions
question
Mathematics, 10.05.2021 09:20
question
English, 10.05.2021 09:20
question
Mathematics, 10.05.2021 09:20
Questions on the website: 13722367