subject
Engineering, 30.11.2019 02:31 ash011519

Phil decided to rescue bobo the dancing bear from a traveling circus that was closing its business. although bobo was a well-behaved grizzly bear, phil took great caution to make sure that bobo would not escape from his yard by reinforcing the yard’s fence with steel and padlocking the gate. one day, without notice, bobo rushed the fence, knocked the padlock off the gate, and escaped from phil’s yard. bobo lunged at a young child in the neighborhood, injuring him. based on these facts:
a) phil will be liable, only if he breached a duty of due care owed to the child.
b) phil will be liable if the harm that resulted to the child was foreseeable to phil.
c) phil will be liable, regardless of the steps that he took to secure the yard.
d) phil will most likely not be liable.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
question
Engineering, 04.07.2019 19:10
Air inially occupying a volume of 1 m2 at 100 kpa, 27 c undergoes three internally reversible processes in series. process 1-2 compression to 500 kpa during which pv constant process 2-3 adiabatic expanslon to 100 kpa process 3-1: constant-pressure expansion to 100 kpa (a) calculate the change of entropy for each of the three processes. (b) calculate the heat and work involved in each process. (c) is this cycle a power cycle or refrigeration cycle?
Answers: 3
question
Engineering, 04.07.2019 19:10
The short distance from the objective lens to the object causes problems at high magnification. which of the following is the most serious? a. cleaning the object surface b. positioning the object c. reflection from the object surface. d. illumination of the object
Answers: 1
question
Engineering, 06.07.2019 02:30
Around steel bar, made from material with a yield stress of 750mpa, is loaded so that it has stresses co locations of maximum normal stress and maximum shear stress. use maximum shear stress and maximum distortion energy theories to calculate the safety factors for initial yielding failures.
Answers: 3
You know the right answer?
Phil decided to rescue bobo the dancing bear from a traveling circus that was closing its business....
Questions
question
Mathematics, 10.12.2020 06:30
Questions on the website: 13722363