Engineering, 29.11.2019 07:31 euniceyi56

For a bolted assembly with six bolts, the stiffness of each bolt is kb = 2 mlbf/in and the stiffness of the members is km = 14 mlbf/in per bolt. an external load of 80 kips is applied to the entire joint. assume the load is equally distributed to all the bolts. it has been determined to use 1/2 in-13 unc grade 8 bolts with rolled threads. it is desired to ﬁnd the range of torque that a mechanic could apply to initially preload the bolts without expecting failure once the joint is loaded. assume a torque coefﬁcient of k = 0.2.

a. determine the yielding factor of safety.
b. determine the overload factor of safety

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.

Answers: 1

Answer

Engineering, 04.07.2019 19:10

10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.

Answers: 2

Answer

Engineering, 04.07.2019 19:20

A5 kg block of fe is dropped into a very large vat of water. the fe and water initial temperatures are 95 and 25 c, respectively. the fe final temperature is 25 c and the water can be treated as a thermal reservoir,. treated as a thermal reservoir take the water to be the system and determine the entropy generation. report vour answer in kj/k.

Answers: 1

Answer

Engineering, 04.07.2019 19:20

Acarnot refrigerator operates in a room in which the temperature is 21°c and of power when operating. if the food compartment of the refrigerator is consumes 3 kw to be maintained at 2°c, determine (a) the coefficient of performance of the cycle and (b) the rate of heat removal from the food compartment. refrigerator cycle that has a higher coefficient of performance than that of the discussed (e) is it possible to develop a carn ot refrigerator, operating between the same temperature limits? explain

Answers: 2

Answer

You know the right answer?

For a bolted assembly with six bolts, the stiffness of each bolt is kb = 2 mlbf/in and the stiffness...

Questions