subject
Engineering, 29.11.2019 06:31 ghernadez

A1: 50-scale model of a submarine is to be tested in a towing tank under two conditions: motion at the free surface and motion far below the surface. the tests are performed in freshwater. on the surface, the submarine cruises at 24 knots. at what speed should the model be towed to ensure dynamic similarity?

far below the surface, the sub cruises at 0.35 knot. at what speed should the model be towed to ensure dynamic similarity? what must the drag of the model be multiplied by under each condition to give the drag of the full-scale submarine

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
question
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
question
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
You know the right answer?
A1: 50-scale model of a submarine is to be tested in a towing tank under two conditions: motion at...
Questions
question
English, 24.08.2019 15:30
question
Mathematics, 24.08.2019 15:30
Questions on the website: 13722367