subject
Engineering, 29.11.2019 05:31 6clevare

22.5-4. minimum liquid flow in a packed tower. the gas stream from a chemical reactor contains 25 mol % ammonia and the rest are inert gases. the total flow is 181.4 kg mol/h to an absorption tower at 303 k and 1.013 × 105 pa pressure, where water containing 0.005 mol frac ammonia is the scrubbing liquid. the outlet gas concentration is to be 2.0 mol % ammonia. what is the minimum flow l min ⁡ ′ using 1.5 times the minimum, plot the equilibrium and operating lines. ans. l min ⁡ ′ = 262.6kg mol/h

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
question
Engineering, 04.07.2019 19:20
The quality is zero at a)-the saturated vapour state b)-the saturated liquid state c)-the saturated liquid-vapour mixture state d)-none of the states in the other answers
Answers: 3
question
Engineering, 06.07.2019 03:10
Steel balls 12 mm in diameter are annealed by heating to 1150 k and then slowly cooled to 400 k in an air att 325 k and h -20 w/m2 k. assume the properties of the steel to be k- 40 w/m k,p 7800 kg/m3, and cp 600 j/kg k. a. determine whether lumped system method can be used to analyze this problem and if so why" b. determine the time required for the cooling process. c. determine the total amount of heat lost from each ball to the ambient air
Answers: 1
question
Engineering, 06.07.2019 03:10
Tom is having a problem with his washing machine. he notices that the machine vibrates violently at a frequency of 1500 rpm due to an unknown rotating unbalance. the machine is mounted on 4 springs each having a stiffness of 10 kn/m. tom wishes to add an undamped vibration absorber attached by a spring under the machine the machine working frequency ranges between 800 rpm to 2000 rpm and its total mass while loaded is assumed to be 80 kg. a) what should be the mass of the absorber added to the machine so that the natural frequency falls outside the working range? b) after a first trial of an absorber using a mass of 35 kg, the amplitude of the oscillation was found to be 10 cm. what is the value of the rotating unbalance? c) using me-3.5 kg.m, find the optimal absorber (by minimizing its mass). what would be the amplitude of the oscillation of the absorber?
Answers: 1
You know the right answer?
22.5-4. minimum liquid flow in a packed tower. the gas stream from a chemical reactor contains 25 mo...
Questions
question
History, 02.03.2022 16:50
question
Mathematics, 02.03.2022 16:50
question
Physics, 02.03.2022 16:50
question
Mathematics, 02.03.2022 16:50
question
Geography, 02.03.2022 16:50
Questions on the website: 13722367