subject
Engineering, 28.11.2019 05:31 Haleysaraya1

Determine the preconsolidation pressure, ’p, using casagrande construction. also, compute overconsolidation ratio, ocr, compression index, cc, and recompression index, cr. indicate these values on the developed plot in part b). determine cc and cr to 3 decimal places. the specimen has the following characteristics: initial height = 25.400 mm, diameter = 63.508 mm, gs = 2.70, and dry mass = 97.8 g. the effective confining stress of the soil in the field from which the sample was taken is estimated to be approximately 87 kpa.

a. compute the initial void ratio of the specimen (to three decimal places)

b. plot the consolidation curve in terms of void ratio versus pressure (…remember to plot pressure on a logarithmic scale! )

c. determine the preconsolidation pressure using casagrande’s graphical method.

d. compute the overconsolidation ratio (ocr) of the soil in the field.

e. use schmertmann’s method to draw the field-corrected consolidation curve for the soil in the field.

f. compute the recompression index, cr, from the consolidation curve.

g. compute the compression index, cc, from the consolidation curve.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
question
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
question
Engineering, 04.07.2019 18:20
An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.
Answers: 3
You know the right answer?
Determine the preconsolidation pressure, ’p, using casagrande construction. also, compute overconso...
Questions
question
Mathematics, 04.06.2020 07:57
question
Mathematics, 04.06.2020 07:57
question
Physics, 04.06.2020 07:57
question
Mathematics, 04.06.2020 07:57
question
Mathematics, 04.06.2020 07:57
question
Mathematics, 04.06.2020 07:57
Questions on the website: 13722361