subject
Engineering, 28.11.2019 02:31 Rinjo

Apower cycle operating at steady state receives energy by heat transfer at a rate at 1800 k and rejects energy by heat transfer to a cold reservoir at a rate at 600 k. for each of the following cases, determine whether the cycle operates reversibly, operates irreversibly, or is impossible. a. q._h = 500 kw, q._c = 100 kw b. q._h = 500 kw, w._cycle = 250 kw, q._c = 200 kwc. w_cycle = 350 kw, q._c = 150 kw d. q._h = 500 kw, q._c = 200 kw.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
question
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
question
Engineering, 04.07.2019 19:10
10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.
Answers: 2
question
Engineering, 04.07.2019 19:10
Acircular aluminum shaft mounted in a journal is shown. the symmetric clearance gap between the shaft and journal is filled with sae 10w-30 oil at t 30°c. the shaft is caused to turn by the attached mass and cord. develop and solve a differential equation for the angular speed of the shaft as a function of time.
Answers: 2
You know the right answer?
Apower cycle operating at steady state receives energy by heat transfer at a rate at 1800 k and reje...
Questions
question
Mathematics, 21.05.2021 17:50
question
Mathematics, 21.05.2021 17:50
Questions on the website: 13722361