Engineering, 28.11.2019 01:31 cexe468
An element is subjected to plane stress. by rotating 20 degrees in the clockwise direction from its original position, the element can reach its principal stress state. which rotation of the element from its original position can reach the state of maximum in-plane shear stress?
25 degrees in the counterclockwise direction
70 degrees in the clockwise direction
45 degrees in the clockwise direction
45 degrees in the counterclockwise direction
70 degrees in the counterclockwise direction
25 degrees in the clockwise direction
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 04.07.2019 18:10
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
An element is subjected to plane stress. by rotating 20 degrees in the clockwise direction from its...
Questions
Spanish, 05.11.2019 04:31
Mathematics, 05.11.2019 04:31
Health, 05.11.2019 04:31
Mathematics, 05.11.2019 04:31
Physics, 05.11.2019 04:31
Social Studies, 05.11.2019 04:31
