subject
Engineering, 28.11.2019 00:31 jaredhoag1982

A115-volt electrical heater is used to warm 0.3 m3/s of air at 100 kpa and 15°c to 100 kpa and 30°c. how much current in amperes must be supplied to this heater? the gas constant of air is 0.287 kpa·m3/kg·k. the constant pressure specific heat of air at room temperature is cp = 1.005 kj/kg·°c.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
You know the right answer?
A115-volt electrical heater is used to warm 0.3 m3/s of air at 100 kpa and 15°c to 100 kpa and 30°c....
Questions
question
Mathematics, 07.01.2021 01:10
question
Mathematics, 07.01.2021 01:10
question
Law, 07.01.2021 01:10
question
English, 07.01.2021 01:10
question
History, 07.01.2021 01:10
Questions on the website: 13722360