Engineering, 26.11.2019 21:31 adjjones2011
If the allowable bearing stress for the material under the supports at a and b is σb = 760 psi, determine the maximum load pmax that can be applied to the beam. the bearing plates each have square cross sections of 5 in. by 5 in. the reactions at the supports are vertical. assume w = 600 lb/ft, a = 12 ft, and b = 6 ft.
Answers: 2
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
Engineering, 04.07.2019 18:10
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
Engineering, 04.07.2019 18:20
Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
Engineering, 04.07.2019 18:20
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
If the allowable bearing stress for the material under the supports at a and b is σb = 760 psi, dete...
English, 09.10.2019 19:10
Mathematics, 09.10.2019 19:10
Chemistry, 09.10.2019 19:10
Social Studies, 09.10.2019 19:10
Chemistry, 09.10.2019 19:10
Mathematics, 09.10.2019 19:10
World Languages, 09.10.2019 19:10