Assume that the flip flop is a d flip flop without a clear or preset. b. assume that the flip flop is a d flip flop with an active low clear. c. assume that the flip flop is a d flip flop with active low clear and preset inputs. d. assume that the flip flop is a t flip flop with the same input as part a, and that q is initially 0. e. assume that the flip flop is a t flip flop with an active low clear and the same inputs as

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature