Engineering, 26.11.2019 03:31 blessing5266
Calculate the minimum required section modulus if the allowable bending stress is 26 ksi.
part4: below, fill in the missing portions of the beam shape designations for the most economical w10, w12, w14, w16, and w18 shapes that are acceptable for this case. also, enter the corresponding section modulus for each case.
part 5
choose the most economical w shape for this beam. select only from the w10, w12, w14, w16, and w18 shapes that were considered in part 4. if you have more than one choice with the same weight, choose the shorter shape.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:10
Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges
Answers: 1
Engineering, 04.07.2019 18:20
Air flows over a heated plate à t a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
You know the right answer?
Calculate the minimum required section modulus if the allowable bending stress is 26 ksi.
Questions
Social Studies, 26.05.2021 20:10
Engineering, 26.05.2021 20:10
Mathematics, 26.05.2021 20:10
Biology, 26.05.2021 20:10
Mathematics, 26.05.2021 20:10
Mathematics, 26.05.2021 20:10
Computers and Technology, 26.05.2021 20:10
English, 26.05.2021 20:10
History, 26.05.2021 20:10
