12â75 the emissivity of a tungsten filament can be approximated to be 0.5 for radiation at wavelengths less than 1 mm and 0.15 for radiation at greater than 1 mm. determine the average emissivity of the filament at (a) 2000 k and (b) 3000 k. also, determine the absorptivity and reflectivity of the filament at both temperatures

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.