Use the phet simulation to identify what happens to the concentrations of a dilute drink mix mixture or a pure drink mix solution for the following scenarios. a pure drink mix solution can be obtained by draining all the mixture, then adding drink mix to the container as a solution (radio button in the upper right area of the simulation). note that the concentration meter can be placed toward the bottom of the container or in the stream of the drink mix.

Burgers vector is generally parallel to the dislocation line. a)-true b)-false

A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.

Aspherical thermocouple measurement errors a spherical thermocouple made of constantin transfer coefficient between the gas and the thermocouple is h used to measure the temperature of a gas. the heat 400 w/m2 k. calculate the maximum diameter d of the thermocouple if the thermocouple's measurement error should be w 23 within 5% of the initial temperature difference in 5 seconds. for constantin, k 8920 kg/m3, and c 410 j/kg. k.