Engineering, 23.11.2019 05:31 kitttimothy55
Athree-point bending test is performed on a glass specimen having a rectangular cross section of height d=5mm and width b=10mm; the distance between support points is 45mm.
a) compute the flexural strength of the load at fracture is 290n.
b) the point at maximum deflection delta(y) occurs at the center of the specimen and is described delta(y)=fl^3/48ei, where e is the modulus of elasticity and i is the cross-sectional moment of inertia. compute delta(y) at a load of 266n.
Answers: 1
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
Athree-point bending test is performed on a glass specimen having a rectangular cross section of hei...
History, 02.08.2019 02:30
History, 02.08.2019 02:30
History, 02.08.2019 02:30
History, 02.08.2019 02:30
Mathematics, 02.08.2019 02:30
Biology, 02.08.2019 02:30
Mathematics, 02.08.2019 02:30
History, 02.08.2019 02:30
History, 02.08.2019 02:30
History, 02.08.2019 02:30
Mathematics, 02.08.2019 02:30
Mathematics, 02.08.2019 02:30
Mathematics, 02.08.2019 02:30