Engineering, 21.11.2019 03:31 msdsh03
An experiment is being designed to measure aerodynamic forces on a building. the model is a 1/550 scale replica of the prototype. the wind velocity on the prototype is 58 ft/s, and the density is 0.0024 slugs/ft^3. the maximum velocity in the wind tunnel is 300 ft/s. the viscosity of the air flowing for the model and the prototype is the same. (a) find the density needed in the wind tunnel for dynamic similarity. (b) a force of 50 lbf is measured on the model. what will the force be on the prototype?
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
Engineering, 04.07.2019 19:10
What is the main objective of using reheat rankine cycle?
Answers: 3
Engineering, 05.07.2019 10:10
What is the correct way to measure the overall length of a boat? measure from the tip of the bow to the highest point on the gunwale. measure from the tip of the bow in a straight line to the stern of the boat. measure from the tip of the bow in a straight line to the back seat. measure from port to starboard at the boat's widest point.
Answers: 1
Engineering, 06.07.2019 02:30
A75mm diameter shaft is supported in a journal bearing 75mm long with a diametral clearance of 0. 1mm. it supports a radial load of 1000 n and is lubricated with sae 50 oil at 70°c. find the friction torque and the power loss when the crankshaft rotates at 2900 rev/min.
Answers: 1
You know the right answer?
An experiment is being designed to measure aerodynamic forces on a building. the model is a 1/550 sc...
Questions
Mathematics, 16.12.2020 23:50
Mathematics, 16.12.2020 23:50
Mathematics, 16.12.2020 23:50
Computers and Technology, 16.12.2020 23:50
English, 16.12.2020 23:50
Mathematics, 16.12.2020 23:50
English, 16.12.2020 23:50
Mathematics, 16.12.2020 23:50
History, 16.12.2020 23:50
Mathematics, 16.12.2020 23:50
