Air at 70°f flows parallel to a smooth, thin, flat plate at 16.5 ft/s. the plate is 10.6 ft long. determine whether the boundary layer on the plate is most likely laminar, turbulent, or somewhere in between (transitional). calculate the boundary layer thickness at the end of the plate where the boundary layer is laminar everywhere and where the boundary layer is turbulent everywhere (obtained from the one-seventh-power law). the kinematic viscosity of air at 70ºf is ν

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1

For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.