An air-standard diesel cycle begins by compressing air at 170 kpa and 315 k. if the compression ratio is 15 and the maximum cycle temperature is 1500 k, determine a) the heat addition, in kj/kg, b) the cut-off ratio, c) the heat removal, in kj/kg, d) net work produced per cycle, in kj/kg, and e) the thermal efficiency. assume properties vary with temperature

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k