A50 mm diameter shaft is subjected to a static axial load of 160 kn. if the yield stress of the material is 350 mpa, the ultimate tensile stress is 400 mpa and fatigue limit (endurance limit) for r = -1.0 is 320 mpa, what is the amplitude of the largest fully-reversed bending moment that can be applied to this shaft so that fatigue dose not occur?

In order to develop this problem it is necessary to take into account the concepts related to fatigue and compression effort and Goodman equation, i.e, an equation that can be used to quantify the interaction of mean and alternating stresses on the fatigue life of a materia.

With the given data we can proceed to calculate the compression stress:

Through Goodman's equations the combined effort by fatigue and compression is expressed as:

Where,

Fatigue limit for comined alternating and mean stress

Fatigue Limit

Mean stress (due to static load)

Ultimate tensile stress

Security Factor

We can replace the values and assume a security factor of 1, then

Re-arrenge for

We know that the stress is representing as,

Then,

Where =Max Moment

I= Intertia

The inertia for this object is

Then replacing and re-arrenge for

Thereforethe moment that can be applied to this shaft so that fatigue does not occur is 3.2kNm

the correct answer is c.stops after infancy and childhood.

myelin is the substance of the central nervous system (cns) that insulates nerve cell axons to increase the speed at which nerve impulse travels. myelination is a process of myelin formation. this process occurs postnatally, begins in the embryo during the midst of early development and finishes after birth.

the warning light flashes for a second or two when the engine starts. if it stays on, there's must be something wrong with the coolant. you should never dare to continue driving when the light is on. pull over as soon as possible and shut the engine off.

hope this is what you're talking about