subject
Engineering, 15.11.2019 01:31 jeanieb

Horizontal shaft paddle wheels are used in a tapered flocculation basin comprised of three compartments. the power input to the paddles progressively decreases through the basin with the first compartment paddle driving with 186 w of power, the second compartment paddle with 30.0 w of power, and the final compartment paddle with 7.50 w of power. each paddle wheel mixes a compartment 4.17 m deep, 3.75 m wide, and 4.17 m long. the normal water temperature is 15 ? c, and average flow rate is 16,000 m3/d.

(a) what is the mixing intensity in each of the three compartments?

(b) if the influent water contains a nearly monodisperse (single-sized) particle size distribution of 20.0 ? m particles with a concentration of 1.8 × 105 particles/ml, what will be the average number of singlet particles in an aggregate leaving the first compartment?

note that viscosity of water is 0.00114 kg/m? s.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 04.07.2019 18:10
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
question
Engineering, 04.07.2019 18:10
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
question
Engineering, 04.07.2019 18:10
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
You know the right answer?
Horizontal shaft paddle wheels are used in a tapered flocculation basin comprised of three compartme...
Questions
question
Mathematics, 29.02.2020 05:27
question
Mathematics, 29.02.2020 05:27
question
Mathematics, 29.02.2020 05:27
Questions on the website: 13722361