2. given that a quality-control inspection can ensure that a structural ceramic part will have no flaws greater than 100 µm (10010-6 m)in size, calculate the maximum service stress available with sic (kic = 3 mpa m1/2) and partially stabilized zirconia (psz) (kic = 9 mpa m1/2). (see example 8.3)

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Plan an experiment to measure the surface tension of a liquid similar to water. if necessary, review the ncfmf video surface tension for ideas. which method would be most suitable for use in an undergraduate laboratory? what experimental precision could be expected?

An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed