subject
Engineering, 13.11.2019 02:31 ayoismeisjjjjuan

The fire hydrant is tested under a high standpipe pressure. the total flow of 9.8 ft3/sec is divided equally between the two outlets, each of which has a cross-sectional area of 0.031 ft2. the inlet cross-sectional area at the base is 0.57 ft2. neglect the weight of the hydrant and water within it and compute the magnitudes of the tension t, the shear v, and the bending moment m in the base of the standpipe at b. the specific weight of water is 62.4 lb/ft3. the static pressure of the water as it enters the base at b is 118 lb/in.2

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 18:20
Determine the damped natural frequencies and the steady state response of a decoupled damped forced two degrees of freedom system. 10ä1 + 2q1 20q1 10 cos t; 10q2 +4q2 + 40q2 10 cos t
Answers: 3
question
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
question
Engineering, 04.07.2019 19:10
Tom is having a problem with his washing machine. he notices that the machine vibrates violently at a frequency of 1500 rpm due to an unknown rotating unbalance. the machine is mounted on 4 springs each having a stiffness of 10 kn/m. tom wishes to add an undamped vibration absorber attached by a spring under the machine the machine working frequency ranges between 800 rpm to 2000 rpm and its total mass while loaded is assumed to be 80 kg a) what should be the mass of the absorber added to the machine so that the natural frequency falls outside the working range? b) after a first trial of an absorber using a mass of 35 kg, the amplitude of the oscillation was found to be 10 cm. what is the value of the rotating unbalance? c) using me-3.5 kg.m, find the optimal absorber (by minimizing its mass). what would be the amplitude of the oscillation of the absorber?
Answers: 3
You know the right answer?
The fire hydrant is tested under a high standpipe pressure. the total flow of 9.8 ft3/sec is divided...
Questions
Questions on the website: 13722363