subject
Engineering, 13.11.2019 00:31 Kayccee9958

For each of these heat transfer processes: (i) calculate how much the entropy of the system changes. (ii) calculate how much the entropy of the environment changes. (iii) is this process irreversible, reversible, or impossible? except where specified (part d) all processes occur at constant temperature. a. 50 joules of heat is transferred from a system at 100 °c to a reservoir at 5 °c b. 50 joules of heat is transferred from a system at 5 °c to a reservoir at 100 °c c. 50 joules of heat is transferred from a system at 5 °c to a reservoir at 5 °c d. 50 joules of heat is transferred to a reservoir at 5 °c. during this heat transfer process, the temperature of the system changes from 15 °c to 5 °c so that dt = 2 8q

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:20
Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options
Answers: 2
question
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
question
Engineering, 04.07.2019 19:10
What is the major difference between thermoplastics and thermosetting plastics from the polymerization structure point of view?
Answers: 2
You know the right answer?
For each of these heat transfer processes: (i) calculate how much the entropy of the system changes...
Questions
Questions on the website: 13722363